5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
418
Default
The default is None.
Command Mode
Global Config
5-367 port lacptimeout (Interface Config)
Set timeout function on a physical interface or range of interfaces of a particular device type (actor or
partner) to either long or short timeout.
Use the
no
command to set the timeout back to its default value on a physical interface of a particular
device type (actor or partner).
Note:
Both the
no portlacptimeout
and the
no lacp actor admin state
commands set the values back
to default, regardless of the command used to configure the ports. Consequently, both commands Will
display in
show running-config
.
port lacptimeout {actor} {long | short}
no port lacptimeout {actor}
Parameters
actor
Enter actor LACP device type.
long
Enter long timeout setting (90 seconds).
short
Enter short timeout setting (3 seconds).
Default
The default is Long.
Command Mode
Interface Config
5-368 port lacptimeout (Global Config)
This command sets the timeout for all interfaces of a particular device type (actor or partner) to either long
or short timeout.
Use the
no
command to set the timeout for all physical interfaces of a particular device type (actor or
partner) back to their default values.
Note:
Both the
no portlacptimeout
and the
no lacp actor admin state
commands set the values back
to default, regardless of the command used to configure the ports. Consequently, both commands Will
display ih
show running-config
.
port lacptimeout {actor} {long | short}
Содержание 5000 Series
Страница 1: ...Draft 1 2 1 ...
Страница 141: ...5000 Series Layer 2 3 Managed Data Center Switch CLI Reference Guide 135 ...
