D-Link 5000 Series, Справочное руководство CLI

Страница: 746 / 1263

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
740
Configure the dead interval for the OSPF virtual interface on the virtual interface identified by areaid and
neighbor . The neighbor parameter is the Router ID of the neighbor.
No command configures the default dead interval for the OSPF virtual interface on the virtual interface
identified by areaid and neighbor . The neighbor parameter is the Router ID of the neighbor.
area areaid virtual-link neighbor dead-interval 1-65535
no area areaid virtual-link neighbor dead-interval
Parameters
areaid Indicates an area ID.
neighbor
Enter the router ID of the virtual neighbor.
Default
The default is 40.
Command Mode
Router OSPF Config
7-135 area virtual-link hello-interval (OSPF)
Configure the hello interval for the OSPF virtual interface on the virtual interface identified by areaid and
neighbor . The neighbor parameter is the Router ID of the neighbor.
No command configures the default hello interval for the OSPF virtual interface on the virtual interface
identified by areaid and neighbor . The neighbor parameter is the Router ID of the neighbor.
area areaid virtual-link neighbor hello-interval 1-65535
no area areaid virtual-link neighbor hello-interval
Parameters
areaid Indicates an area ID.
neighbor Enter the router ID of the virtual neighbor.
Default
The default is 10.
Command Mode
Router OSPF Config