5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
1062
neighbor {ipv4-address | ipv6-address} filter-list as-path-list-number {in | out}
no neighbor {ipv4-address | ipv6-address} filter-list as-path-list-number {in | out}
Parameters
ipv4-address
|
ipv6-address
The neighbors lP address.
as-path-list-number
Identifies an AS-PATH list.
in
The AS-PATH list is applied to advertisements received from the
neighbor.
out
The AS-PATH list is applied to advertisements to be sent to the
neighbor.
Default
The default is No Neighbor Filter Lists configured.
Command Mode
BGP Router Config
11-58 neighbor filter-list (IPv4 VRF Address Family Config)
This command filters advertisements to or from a specific neighbor according to the advertisements AS-
PATH.Only a single AS-PATH list can be configured in each direction for each neighbor. If you invoke the
command a second time for a given neighbor, the new AS-PATH list number replaces the previous AS-
PATH list number.
lf you assign a neighbor filter list to a nonexistent AS-PATH access list, all routes are filtered.
Use the
no
command to unconfigure neighbor filter lists.
neighbor ip-address filter-list as-path-list-number {in | out}
no neighbor ip-address filter-list as-path-list-number {in | out}
Parameters
ip-address
The neighbor’s IPv4 address.
as-path-list-number
Identifies an AS-PATH list.
in
The AS-PATH list is applied to advertisements received from the
neighbor.
out
The AS-PATH list is applied to advertisements to be sent to the
neighbor.
Default
The default is No Neighbor Filter Lists configured.
Содержание 5000 Series
Страница 1: ...Draft 1 2 1 ...
Страница 141: ...5000 Series Layer 2 3 Managed Data Center Switch CLI Reference Guide 135 ...
