D-Link 5000 Series, Справочное руководство CLI

Страница: 37 / 1263

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
31
4-19 show network ipv6 neighbors
This command is used to show information regarding the IPv6 neighbor entries cached on the network
port. The information is updated in order to display the type of the entry.
show network ipv6 neighbors
Parameters
None
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following provides an example of the command
(Routing) #show network ipv6 neighbors
Neighbor Age
IPv6 Address Type MAC Address isRtr State (Secs)
------------------------ --------- ----- --------- ----- -------
FE80::5E26:AFF:FEBD:852C Dynamic 5c:26:0a:bd:85:2c True Stale 3
Display Parameters
IPv6 Address Indicates the IPv6 address of the neighbor.
Type Indicates the type of neighbor entry. If the entry is manually configured,
the type is Static; if the entry is dynamically resolved, the type is
Dynamic.
MAC Address
Indicates MAC Address of the neighbor.
isRtr
Indicates whether or not the neighbor is a router. If TRUE, the neighbor
is a router; if FALSE, the neighbor is not a router.
Neighbor State Indicates the state of the neighbor cache entry. The possible values are
as follows: Incomplete, Reachable, Stale, Delay, Probe, and Unknown.
Age Indicates the time (in seconds) that has elapsed since the most recent
entry was added to the cache.
4-20 show serviceport ipv6 neighbors
This command is used to show information regarding the IPv6 neighbor entries cached on the service
port. The information is updated in order to display the type of the entry.