5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
1074
as-number
The autonomous system number of the neighbor’s AS. The range is 1 to
429496729. If the neighbor's AS number is the same as the local router,
the peer is an internal peer. Otherwise, the peer is an external peer. A
neighbor can inherit this configuration from a peer template.
Default
The default is Neighbors not configured.
Command Mode
•
BGP Router Config
•
Peer Template Config
11-74 neighbor remote-as (IPv6 Address Family Config)
This command configures a neighbor and identifies the neighbor's autonomous system. The neighbor's
AS number must be specified when the neighbor is created. Up to 128 neighbors may be configured.
inheriting a template with the remote-as parameter automatically creates the neighbor if the neighbor
does not exist.
Use the
no
command to unconfigure neighbors.
neighbor {ipv4-address | ipv6-address [interface interface-name] | autodetect interface interface-
name remote-as as-number
no neighbor {ipv4-address | ipv6-address [interface interface-name] | autodetect interface
interface-name remote-as
Parameters
ipv4-address
The neighbor’s IPv4 address.
ipv6-address
The neighbor’s IPv6 address.
interface interface-name
If the neighbor's IPv6 address is a link local address, the local interface
must also be specified.
autodetect interface
interface-name
The routing interface on which the neighbors link local IPv6 address is
auto-detected.
as-number
The autonomous system number of the neighbor’s AS. The range is 1 to
65,535. If the neighbor's AS number is the same as the local router, the
peer is an internal peer. Otherwise, the peer is an external peer. A
neighbor can inherit this configuration from a peer template.
Default
The default is Neighbors not configured.
Command Mode
•
IPv6 Address Family Config
•
Peer Template Config
Содержание 5000 Series
Страница 1: ...Draft 1 2 1 ...
Страница 141: ...5000 Series Layer 2 3 Managed Data Center Switch CLI Reference Guide 135 ...
