D-Link 5000 Series, Справочное руководство CLI

Страница: 960 / 1263

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
954
ip pim bsr-border
no ip pim bsr-border
Parameters
None
Default
The default is Disabled.
Command Mode
Interface Config
Example
The following provides an example of the command.
(Routing)(Interface 0/1)#ip pim bsr-border
9-28 ip pim bsr-candidate
Configures the router so that it will announce its candidacy to serve as a bootstrap router (BSR). The
slot/port argument corresponds to either a physical routing interface or to a VLAN routing interface. The
keyword VLAN is utilized, instead of the slot/port format, to directly specify the VLAN ID of the routing
VLAN.
The no command removes the configured PIM Candidate BSR router.
Note: Only when the PIM-SM is configured as the PIM mode will this command take effect.
ip pim bsr-candidate interface {slot/port | vlan 1-4093} hash-mask-length [bsr-priority] [interval
interval]
no ip pim bsr-candidate interface {slot/port | vlan 1-4093}
Parameters
slot/port Interface number on this router from which the BSR address is derived,
to make it a candidate. This interface must be enabled with PIM.
vlan 1-4093 Indicates an interface in VLAN format (1-4093).
hash-mask-length Length of a mask (32 bits maximum) that is to be ANDed with the group
address before the hash function is called. All groups with the same
seed hash correspond to the same RP. For example, if this value is 24,
only the first 24 bits of the group addresses matter. This allows you to
get one RP for multiple groups.
bsr-priority
(Optional) Priority of the candidate BSR. The range is an integer from 0
to 255. The BSR with the larger priority is preferred. If the priority values
are the same, the router with the larger IP address is the BSR. The
default value is 0.