D-Link 5000 Series, Справочное руководство CLI

Страница: 760 / 1263

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
754
Command Mode
OSPFv2 Router Config
7-162 timers spf
Configure the SPF delay time and hold time. The valid range for both parameters is 0-65535 seconds.
timers spf delay-time hold-time
Parameters
delay-time Indicates the delay timer value (0-65535) in seconds.
hold-time Indicates the hold timer value (0-65535) in seconds.
Default
The default is as follows:
•
delay-time – 5
•
hold-time – 10
Command Mode
Router OSPF Config
7-163 trapflags (OSPF)
Enable individual OSPF traps, enable a group of trap flags at a time, or enable all the trap flags at once.
The different groups of trapflags, and each group’s specific trapflags to enable or disable, are listed in
Table 10.
Table 10: Trapflags Groups
Group Flags
errors
•
authentication-failure
•
bad-packet
•
config-error
•
virt-authentication-failure
•
virt-bad-packet
•
virt-config-error
Isa
•
lsa-maxage
•
Isa-originate
overflow
•
lsdb-overflow
•
lsdb-approaching-overflow