D-Link 5000 Series, Справочное руководство CLI

Страница: 211 / 1263

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
205
Email Alert Password............................. 123456789
Display Parameters
No of mail servers
configured Indicates the number of SMTP servers that are configured on the switch.
Email Alert Mail Server
Address
Indicates the IPv4 address or DNS hostname for the configured SMTP
server.
Email Alert Mail Server
Port Indicates the TCP port used by the switch to send email to the SMTP
server.
Email Alert Security
Protocol Indicates the security protocol (TLS or none) used by the switch to
perform authentication with the SMTP server.
Email Alert Username Indicates the username used by the switch to perform authentication
with the SMTP server.
Email Alert Password
Indicates the password used by the switch to perform authentication
with the SMTP server.
System Utility and Clear Commands
In this section, the commands used to help troubleshoot issues with connectivity and to restore the
factory defaults of various configurations are described.
5-75 clear config
This command is used to reset the configuration of the switch back to that included in the factory-defaults
configuration file, if that file is present, without the switch being powered off. In the event that the factory-
defaults configuration file is not present, then the application of D-LINK OS compile time defaults to the
switch occurs instead. When this command is issued, a prompt appears asking for confirmation that the
reset should proceed. If the user enters y at the prompt, then the current configuration of the switch will
automatically be reset to the default values. Entering y does not, however, reset the switch itself.
clear config
Parameters
None
Default
The default is None.
Command Mode
Privileged EXEC