D-Link 5000 Series, Справочное руководство CLI

Страница: 219 / 1263

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
213
Note: The maximum length for the file name is 31 characters, while the maximum
length for the file path
is 160 characters.
For FTP, TFTP, SFTP and SCP, the ipaddr/hostname parameter consists of the host name of the server
or the IP address, filepath indicates the path to the file, and filename consists of the name of the file that
the user wants to upload or download. For SFTP and SCP, the username parameter consists of the
username used for logging into the remote server via SSH.
Note: ip6address also constitutes a valid parameter for the routing of packages that support IPv6.
If the user wishes to
copy OpenFlow SSL certificates to the switch using TFTP or XMODEM, then only
the following options relevant to the OpenFlow SSL certificates should be used:
copy [<mode/file>] nvram:{openflow-ss1-ca-cert | openflow-ssl-cert | openflow-ssl-priv-key}
Parameters
source Indicates the originating location of the source.
destination Indicates the intended location to store
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following provides an example of the downloading and applying of the ias users file.
(Routing)#copy tftp://10.131.17.104/aaa_users.txt ias-users
Mode............................................. TFTP
Set Server IP.................................... 10.131.17.104
Path............................................. /
Filename......................................... aaa_users.txt
Data Type........................................ IAS Users
Management access will be blocked for the duration of the transfer
Are you sure you want to start? (y/n) y
File transfer operation completed successfully.
Validating and updating the users to the IAS users database.
Updated IAS users database successfully.