D-Link 5000 Series, Справочное руководство CLI

Страница: 947 / 1263

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
941
9-9 show ip mroute group
Shows the multicast configuration settings – including the flags, timer settings, RPF neighboring routers,
incoming and outgoing interfaces, and expiration times – for all of the entries included in the multicast
mroute table that contains the given groupipaddr.
show ip mroute group groupipaddr {detail | summary}
Parameters
groupipaddr Indicates the given group IP address.
detail Displays the multicast routing table details.
summary Displays the multicast routing table summary.
Default
The default is None.
Command Mode
•
Privileged EXEC
•
User EXEC
Display Parameters
Source IP Addr The IP address of the multicast data source.
Group IP Addr The IP address of the destination of the multicast packet.
Protocol The multicast routing protocol by which this entry was created.
Incoming Interface The interface on which the packet for this group arrives.
Outgoing Interface List The list of outgoing interfaces on which this packet is forwarded.
9-10 show ip mroute source
Shows the multicast configuration settings – including the flags, timer settings, RPF neighboring routers,
incoming and outgoing interfaces, and expiration times – for all of the entries included in the multicast
mroute table that contains the indicated source IP address or the source IP address and group IP
address pair.
show ip mcast mroute source sourceipaddr {summary | detail}
Parameters
summary Display the multicast routing table summary.