5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
80
4-87
passwords strength minimum character-classes
This command is used to specify the minimum number of characters classes that a password must
contain. The classes of characters are uppercase letters, lowercase letters, special characters, and
numeric characters. The valid range of value is 0-4, with the default value being 4.
The
no
command is used to reset the minimum number of classes of characters required in a password
to the default value.
passwords strength minimum character-classes 0-4
no passwords strength minimum character-classes
Parameters
None
Default
The default is 4.
Command Mode
Global Config
4-88
passwords strength exclude-keyword
This command is used when configuring the password to exclude the specified keyword. It will ensure
that the keyword is not accepted as a substring by the password in any form (for example, in between the
string, case in-sensitive, or in reverse). A maximum of up to 3 such keywords can be configured by the
user.
The
no
command is used to reset the restriction for the keyword specified or for all the keywords thus
configured.
passwords strength exclude-keyword [keyword]
no passwords strength exclude-keyword [keyword]
Parameters
keyword
(Optional)Select the keyword to exclude, range: 2 – 64.
Default
The default is None.
Command Mode
Global Config
Содержание 5000 Series
Страница 1: ...Draft 1 2 1 ...
Страница 141: ...5000 Series Layer 2 3 Managed Data Center Switch CLI Reference Guide 135 ...
