D-Link 5000 Series, Справочное руководство CLI

Страница: 218 / 1263

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
212
In the event that ONIE is installed, the os parameter will be added to the reload command. The use of this
parameter will enable the user to boot back into ONIE.
reload [configuration [scriptname]| os]
Parameters
configuration This parameter causes the configuration to be gracefully reloaded. In
the event that no co
nfiguration file is specified, then the startup-config
file will be loaded.
scriptname
Indicates the configuration file to load. The extension must be included
in the scriptname.
os
The os reload feature is used to remove the OS and reinstall the new
NOS.
Default
The default is None
Command Mode
Privileged EXEC
5-87 copy
The copy command is used to upload and download files to and from the switch. Files can be uploaded
and downloaded from a server using FTP, TFTP, Xmodem, Ymodem, or Zmodem. Also, it should be
noted that a password is required if FTP is used.
copy source destination
Replace the destination and source parameters with the options indicated in “Copy Parameters” .
Meanwhile, use one of the following values for the url source or destination:
(xmodem | tftp://ipaddr|hostname | ip6address | hostname/filepath/filename [noval] | sftp | scp://
username@ipaddr | ipv6address/filepath/filename | ftp://user@ipaddress | hostname/filepath/filename}
The keyword ias-users allows for the downloading of the IAS user database file. When that file is
downloaded, the switch IAS user's database will be replaced with the users and the attributes included in
the downloaded file. In the command
copy url ias-users , one of the following is used for url in the IAS
users file:
{{tftp://<ipaddr | hostname> | <ipv6address | hostname> /<filepath>/<filename>} | {sftp | scp://
<username>@<ipaddress>/<filepath>/<filename>}}