D-Link 5000 Series, Справочное руководство CLI

Страница: 464 / 1263

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
458
vlanid Enter a VLAN ID (1-4093).
Default
The default is None.
Command Mode
Interface Config
5-417 macfilter addsrc all
Add all interfaces using macaddr and vlanid to the source filter. The macaddr parameter must be defined
as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The vlanid parameter must be
identified as a valid VLAN.
No command removes all interfaces from the source filter as set by the MAC filter using the MAC address
( macaddr ) and VLAN ( vlanid ). You must specify the macaddr parameter as a 6-byte hexadecimal number
in the format of b1:b2:b3:b4:b5:b6. The vlanid parameter must identify a valid VLAN.
macfilter addsrc all macaddr vlanid
no macfilter addsrc all macaddr vlanid
Parameters
macaddr Enter MAC address.
vlanid Enter a VLAN ID (1-4093).
Default
The default is None.
Command Mode
Global Config
5-418 show mac-address-table static
Display the Static MAC Filtering information for all Static MAC Filters. By specifying all , all Static MAC
Filters in the system are displayed. Both macaddr and vlanid require a specified value for the system to
display Static MAC Filter information only for that MAC address and VLAN.
Note: Only multicast address filters have destination port lists.
show mac-address-table static {macaddr vlanid | all}