D-Link 5000 Series, Справочное руководство CLI

Страница: 779 / 1263

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
773
Import Summary LSAs Shows whether to import summary LSAs into the NSSA.
Redistribute into NSSA Shows whether to redistribute information into the NSSA.
Default Information
Originate Shows whether to advertise a default route into the NSSA.
Default Metric Metric value for the default route advertised into the NSSA.
Default Metric Type Metric type for the default route advertised into the NSSA.
Translator Role NSSA translator role of the ABR, which is always or candidate.
Translator Stability Interval Amount of time that an elected translator continues to perform its duties
after it determines that its translator status has been deposed by
another router.
Translator State
Shows whether the ABR translator state is disabled, always, or elected.
7-186 show ip ospf asbr
Display the internal OSPF routing table entries to Autonomous System Boundary Routers (ASBR) for the
specified virtual router. If no router is specified, it displays information for the default router.
show ip ospf asbr [vrf vrf-name]
Parameters
vrf vrf-name (Optional) Display the OSPF Autonomous System Boundary Routers
information of a virtual router.
Default
The default is None.
Command Mode
•
Privileged EXEC
•
User EXEC
Display Parameters
Type Type of the route to the destination:
•
intra – intra-area route
•
inter – Inter-area route
Router ID
Router ID of the destination.
Cost
Cost of using this route.
Area ID
Area ID of the area from which this route is learned.
Next Hop
Next hop toward the destination.
Next Hop lntf
Outgoing router interface to use when forwarding traffic to the next hop.