5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
891
Display Parameters
Interface
The routing interface associated with the rest of the data in the row.
OSPF Admin Mode
States whether OSPF is enabled or disabled on a router interface.
OSPF Area ID
The OSPF Area ID for the specified interface.
Router Priority
The router priority. The router priority determines which router is the
designated router.
Metric Cost
The priority of the path. Low costs have a higher priority than high costs.
Hello Interval
The frequency, in seconds, at which the interface sends Hello packets.
Dead Interval
The amount of time, in seconds, the interface waits before assuming a
neighbor is down.
Retransmit Interval
The frequency, in seconds, at which the interface sends LSA.
Retransmit Delay Interval
The number of seconds the interface adds to the age of LSA packets
before transmission.
LSA Ack Interval
The amount of time, in seconds, the interface waits before sending an
LSA acknowledgement after receiving an LSA.
8-118 show ipv6 ospf interface stats
Shows the statistics for the specified interface. The command only displays information, however, if OSPF
is enabled.
show ipv6 ospf interface stats {slot/port | vlan id}
Parameters
slot/port
Enter an interface in slot/port format.
vlan id
Enter an interface in VLAN format.
Default
The default is None.
Command Mode
•
Privileged EXEC
•
User EXEC
Display Parameters
OSPFv3 Area ID
The area ID of this OSPF interface.
Содержание 5000 Series
Страница 1: ...Draft 1 2 1 ...
Страница 141: ...5000 Series Layer 2 3 Managed Data Center Switch CLI Reference Guide 135 ...
