D-Link 5000 Series, Справочное руководство CLI

Страница: 1253 / 1263

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
1247
Component Message Cause
PIMDM PlMDMv6 Socket Memb’ship
Disable Failed for rtrlfNum – xxx PlMDMv6 Socket Creation/options Disable
with Kernel IP Stack Failed. As a result of
this, the PIMv6 Control packets are still
received on the interface at the application
though no protocol is enabled.
PIMDM PIMDM MRT Table Max Limit – xxx
Reached; cannot accommodate
any further routes. PIMDM Multicast Route table (S, G) has
reached maximum capacity and cannot
accommodate new registrations anymore.
Table 58: DVMRP Log Messages
Component Message Cause
DVMRP DVMRP Heap memory initialization
is Failed for the specified address
family This message appears when trying to
enable DVMRP Protocol
DVMRP DVMRP Heap memory de-
initialization is Failed for the
specified address family. This message appears when trying to
disable DVMRP Protocol. As a result of
this, the subsequent attempts to
enable/disable DVMRP will also fail.
DVMRP DVMRP protocol initialization
sequence Failed. This could be due to the non-availability of
some resources. This message appears
when trying to enable DVMRP Protocol.
DVMRP DVMRP All Routers Address – xxx
Delete from the DTL Mcast List
Failed for intf – xxx. DMVRP All Routers Address deletion from
the local multicast list Failed. As a result of
this, DVMRP Multicast packets are still
received at the application though DVMRP
is disabled.
DVMRP Mcast Forwarding Mode Disable
Failed for intf – xxx. The Multicast Forwarding mode Disable
Failed for this routing interface.
DVMRP DVMRP All Routers Address – xxx
Add to the DTL Mcast List Failed
for intf – xxx. DMVRP All Routers Address addition to the
local multicast list Failed. As a result of this,
DVMRP Multicast packets with this address
will not be received at the application.
DVMRP Mcast Fon/varding Mode Enable
Failed forintf – xxx. The Multicast Forwarding mode Enable
Failed for thi r ing interface. As a result of
this, the ability to forward Multicast packets
does not function on this interface.
DVMRP DVMRP Probe Control message
Send Failed on rtrlfNum – xxx. DVMRP Probe control message send
failed. This couId mostly be because of a
Failure return status of the socket call
sendto(). As a result of this, the DVMRP
neighbor could be lost in the neighboring
DVMRP routers.