D-Link 5000 Series, Справочное руководство CLI

Страница: 336 / 1263

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
330
Command Mode
•
Privileged EXEC
•
User EXEC
Example
The following is a command example.
(Routing)# show spanning-tree brief
Bridge Priority.................................. 32768
Bridge Identifier................................ 80:00:00:05:64:2F:0D:E5
Bridge Max Age................................... 20
Bridge Max Hops.................................. 20
Bridge Hello Time................................ 2
Bridge Forward Delay............................. 15
Bridge Hold Time................................. 6
Display Parameters
Bridge Priority Displays the specified bridge priority for both Common and Internal
Spanning Tree (CST). Displayed in multiples of 4096, the value range is
from 0 to 61440. It is displayed in multiples of 4096.
Bridge Identifier Bridge identifier for the selected MST instance, composed of the bridge
priority and the base MAC address of the bridge.
Bridge Max Age Displays the specified bridge max age for CST. The value is defined in
seconds ranging from 6 to 40, less than or equal to 2 x (Bridge Forward
Delay -1).
Bridge Max Hops
Bridge max-hops count for the device.
Bridge Hello Time
Displays the bridge hello timer value between each bridge protocol data
unit through a port. The value is defined as 2 seconds by default with a
range between 1 and 10 seconds forward delay.
Bridge Forward Delay Displays the specified bridge forward delay parameter for CST. The
value is defined in seconds ranging from 4 to 30.
Bridge Hold Time Minimum time between transmission of Configuration Bridge Protocol
Data Units (BPDUs).
5-240 show spanning-tree interface
Display the settings and parameters for a specific switch port within the common and internal spanning
tree. The
{slot/port | lag lag-id} is the displayed switch port or LAG. The following details are displayed:
show spanning-tree interface {slot/port | lag lag-id}