Club Car CARRYALL 272, Руководство по техническому обслуживанию и ремонту

Страница: 155 / 312

TROUBLESHOOTING AND ELECTRICAL SYSTEM: FE400, KEY-START ENGINE Test Procedures
2006-2010 Turf/Carryall 272/472 and XRT 1200/1200 SE Maintenance and Service Manual Page 11-27
11
6. Test the secondary coil separately from the spark plug cap.
6.1. Using a multimeter set to 20k ohms, place the red (+) probe of the meter into the end of the spark
plug wire and place the black (–) probe on a clean unpainted surface of the engine or frame
(Figure 11-31, Page 11-28) . If the resistance is between 6.0k - 11.0k ohms, the secondary coil is
within acceptable limits. If the resistance is not between 6.0k - 11.0k ohms, bench test the ignition
coil.
7. If the preceding procedures indicate that the ignition coil resistance readings are within acceptable
ranges, but the coil fails to function properly, proceed to the following bench test procedures.
Figure 11-28 Ignition Coil and Cap Figure 11-29 Spark Plug Cap Removal
Figure 11-30 Spark Plug Cap Test
CAP
7
4
3
1
2
5
2m
20
m
200
m
2k
200
200
200 200
20
2
200
m
500
20k
200k
2000
k
1000
OFF
WAVETEK 5XL
V
V
V
A
!
!
COM 200nA
MAX
1000 ---
750V
FUSED
2