Canon imagePRESS 1110 Скачать руководство пользователя страница 218 | Manualshive

Страница: 218 / 1603

background image

2

2

2-170

2-170

Technology > MEAP > Login Service > Site internal access mode

Technology > MEAP > Login Service > Site internal access mode

CAUTION:

•  The Active Directory subnet is assumed to be the same subnet as the device subnet.
•  In the Active Directory addresses, the Active Directories of the same site are listed.
•  Active Directories of the same subnet as the device are listed first.
•  If there is no Active Directory with the same subnet as the device, Active Directories

belonging to different subnets than the device are listed.

• The Active Directories within the same site are accessed in order. Note, however,

that where there are multiple Active Directories within the same site, access to those
Active Directories will be in the order in which the address list was obtained.

• If there is no Active Directory within the same site, if access outside of the site is

programmed, Active Directories outside of the site will be accessed in the order in
which the address list was obtained.

Settings for site internal access mode
Switching between site internal access mode/ non site internal access mode, as well as
detailed mode settings, are done via DMS or iWEMC. Site internal access mode settings
window (DMS)
Site list acquisition
After booting up, upon the first login by LLS or ILS/ RLS, the site list is obtained from the
Active Directory. In order to obtain the site list from the Active Directory, Active Directory
needs to be accessed in LDAP, so SASL-Kerberos-Bind is used by the login user account. If
authentication by Active Directory should fail, an authentication error will be generated and
the site list will be acquired again from Active Directory upon the next login.

In SSO-H, the Active Directory to be accessed when acquiring the site list cannot be
specified. In other words, if there is no site list, which site's Active Directory is accessed
depends upon the order of the Active Directory addresses returned by DNS. Therefore, when
acquiring the site list, LDAP may access the Active Di rectory of a different site. Therefore, in
such cases, it is sometimes necessary to access across sites or subnets, which means that
LDAP protocol needs to have continuity across sites (subnets) (normally, LDAP is port No.
389). Further, if connection with Active Directory fails when acquiring site information, another
Active Directory will be accessed.
Site information, once it has been acquired, is cached within the device. The life settings of
the cache can be set so that site information in the cache is updated upon the first login after
the device boots up, or so that the cache is not updated once acquired.

Settings for site internal access mode
Switching between site internal access mode/ non site internal access mode, as well as
detailed mode settings, are done via DMS or iWEMC.
Site internal access mode settings window (DMS)
Site internal access mode settings window (DMS)

Site internal access mode process diagram

Domain X

SSO-Tokyo

172.24.12.80

DC-Tokyo/DNS

172.24.12.2

SSO-Tokyo

192.168.1.90

DC-Osaka/DNS

172.168.1.2

SSO-Tokyo

DC-Hakata/DNS

211.111.1.30

211.111.1.3

WAN

WAN

Repllication

Repllication

Site:Tokyo

172.12.12.0/24

172.24.35.0/24

1. When making initial

settings, obtain site list

and ascertain which

site the device

belongs to.

2. Get Active

Directory list

4. Access Active

Directory of same

site

3. Access Active

Directory of same

subnet

Site:Osaka

192.168.1.0/24

Site:Hakata

211.111.1.0/24

DNS Server A

records:

AD 192.168.1.2

AD 172.24.12.2

AD 172.24.35.2

AD 211.111.1.30

SSO-Tokyo 172.24.12.80

SSO-Osaka 192.168.1.90

SSO-Hakata 211.111.1.3

Site:Tokyo::

172.24.12.0/24

172.24.35.0/24

Site:Osaka::

192.168.1.0/24

Site:Hakata::

211.111.1.0/24

F-2-252

F-2-253

«
...
216
217
218
219
220
...
»

Содержание imagePRESS 1110




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для imagePRESS 1110

Document Centre 535

Бренд: Xerox Страницы: 2

Document Centre 50

Бренд: Xerox Страницы: 6

Document Centre 50

Бренд: Xerox Страницы: 2

Бренд: Xerox Страницы: 13

Бренд: Gestetner Страницы: 44

Бренд: Gestetner Страницы: 47

Бренд: Gestetner Страницы: 87

Бренд: Gestetner Страницы: 150

PointSource Ai 3010

Бренд: Mita Страницы: 478

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды