9
9
9-11
9-11
Installation > Installation > Installing the host machine
Installation > Installation > Installing the host machine
Installation
Installing the host machine
NOTE :
• The fall-prevention fixture is engaged with the adjustor.
• The fall-prevention fixture does not allow the front cover and the waste toner
to open unless the adjuster is in contact with the floor. (2 pc to be installed)
1) Decide where to install the host machine.
Loosen the screw and turn the 2 adjustors with your hand until they are lowered
to be securely in contact with the floor.
NOTE :
Be sure to use your hand to turn the adjustors. If your hand does not fit in,
use a screwdriver so that you can use your hand to turn the adjustors.
Adjustor
Stopper A
F-9-21
2) Turn the stopper B and fix it.
• Screw (TP: M4X8)
3) Tighten the screw that has been loosened in step 1).
4) Move the adjustor in the direction of the arrow by
the screwdriver to fix it.
5) Remove the tape.
Stopper B
x1
F-9-22
Содержание imagePRESS 1110
