ABB ACQ580, Руководство по прошивке

Страница: 117 / 422

Parameters 113
06.18 Start inhibit status
word Start inhibit status word. This word specifies the source of the
inhibiting signal that is preventing the drive from starting.
The conditions marked with an asterisk (*) only require that
the start command is cycled. In all other instances, the
inhibiting condition must be removed first.
See also parameter
06.16 Drive status word 1 , bit 1.
This parameter is read-only.
Note: At the moment the software does not work as it should.
Now bit 5 never changes state, and Start interlock changes bit
6 state, not bit 4 bit state. This will be corrected in the next
software version.
-
0000h…FFFFh Start inhibit status word. 1 = 1
06.19 Speed control
status word Speed control status word.
This parameter is read-only. -
0000h…FFFFh Speed control status word. 1 = 1
No. Name/Value Description Def/FbEq16
Bit Name Description
0 Not ready run 1 = DC voltage is missing or drive has not been parametrized
correctly. Check the parameters in groups 95 and 99.
1 Ctrl location changed * 1 = Control location has changed
2 SSW inhibit 1 = Control program is keeping itself in inhibited state
3 Fault reset * 1 = A fault has been reset
4 Start interlocked 1 = Start interlocked
5 Run permissive 1 = Run permissive signal missing
6 Reserved
7 STO 1 = Safe torque off function active
8 Current calibration
ended * 1 = Current calibration routine has finished
9 ID run ended * 1 = Motor identification run has finished
10 Reserved
11 Em Off1 1 = Emergency stop signal (mode off1)
12 Em Off2 1 = Emergency stop signal (mode off2)
13 Em Off3 1 = Emergency stop signal (mode off3)
14 Auto reset inhibit 1 = The autoreset function is inhibiting operation
15 Reserved
Bit Name Description
0 Zero speed
1 = Drive has been running below zero speed limit (par. 21.06 )
for a time defined by parameter 21.07 Zero speed delay
1 Forward
1 = Drive is running in forward direction above zero speed limit
(par.
21.06 )
2 Reverse
1 = Drive is running in reverse direction above zero speed limit
(par.
21.06 )
3…6 Reserved
7
Any constant speed
request 1 = A constant speed or frequency has been selected; see par.
06.20 .
8…15 Reserved