ABB ACQ580, Руководство по прошивке

Страница: 35 / 422

Control panel 31
Keys
The keys of the control panel are described below.
Left softkey
The left softkey ( ) is usually used for exiting and canceling. Its function in a given
situation is shown by the softkey selection in the bottom left corner of the display.
Holding down exits each view in turn until you are back in the Home view. This
function does not work in special screens.
Right softkey
The right softkey ( ) is usually used for selecting, accepting and confirming. The
function of the right softkey in a given situation is shown by the softkey selection in
the bottom right corner of the display.
The arrow keys
The up and down arrow keys ( and ) are used to highlight selections in menus
and selection lists, to scroll up and down on text pages, and to adjust values when,
for example, setting the time, entering a passcode or changing a parameter value.
The left and right arrow keys ( and ) are used to move the cursor left and right in
parameter editing and to move forward and backward in assistants. In menus, and
function the same way as and , respectively.
Help
The help key (
)
opens a help page. The help page is context-sensitive, in other
words, the content of the page is relevant to the menu or view in question.
Hand, Off and Auto
The ACQ580 can be in local or external control. The local control has two modes:
Hand and Off. See also the diagram in section
Local control vs. external control on
page 37 .
Hand key ( ):
• In local control / Off mode: Starts the drive. The drive will switch to the Hand
mode.
• In external control: Switches the drive to local control / Hand mode, keeping it
running.
?