ABB ACQ580, Руководство по прошивке

Страница: 98 / 422

94 Program features

Diagnostics menu
The Diagnostics menu provides quick information about active faults, warnings and
inhibits in the drive and how to fix and reset them. It also helps you to find out why the
drive is not starting, stopping or running at the desired speed.
• Drive actual values: Use this view to see the drive actual state.
• Active faults: Use this view to see currently active faults and how to fix and reset
them.
• Active warnings: Use this view to see currently active warnings and how to fix
them.
• Active inhibits: Use this view to see the active inhibits and how to fix them. In
addition, in the Clock, region, display menu you can disable (enabled by default)
and pop-up views showing information on inhibits when you try to start the drive
but it is prevented.
• Fault & event log: Use this view to see the list of faults, warnings and other
events that have occurred in the drive.
• Start/stop/reference summary: Use this view to find out where the control
comes from if the drive is not starting or stopping as expected, or runs at an
undesired speed.
• Limit status: Use this view to find out whether any limitations are active if the
drive is running at undesired speed.
• Fieldbus: Use this view to find out status information and sent and received data
from fieldbus.
• Load profile: Use this view to see the status information of load distribution (that
is, drive running time spent on each load level) and peak load levels.
• Motor summary: Use this view to find out motor nominal values, control mode
and whether ID run has been completed.
Settings
• Menu - Diagnostics
• Menu - Primary settings - Clock, region, display - Show inhibit pop-up .