ZyXEL Communications MSC1000G Series, User Manual

Page: 735 / 1168

Management Switch Card User’s Guide
735
C
H A P T E R
2 8
multicast Commands
This chapter shows you how to use the
multicast
commands.
28.1 multicast Commands Summary
The following table lists the
multicast
commands. The P column on the right indicates the
administrator privilege level needed to use the command.
Table 362
multicast Commands
COMMAND DESCRIPTION P
multicast bandwidth default < bandwidth >
Sets the default bandwidth (1 ~100 000
kbps) allowed for multicast channel(s) for
which you have not set the bandwidth
settings. 8
delete < index >
Removes the specified multicast bandwidth
configuration. 8
port disable < slot-
port >
Deactivates multicast bandwidth setting on
a port. 8
enable < slot-port >
Activates multicast bandwidth setting on a
port. 8
set < slot-port >
< bandwidth >
Sets the maximum multicast bandwidth
allowed on a port. 8
show < slot >|< slot-
port >
Displays multicast bandwidth settings on
the specified line card or port. 1
set < index > < start-
mcast-ip > <e nd-
mcast-ip >
< bandwidth >
Sets bandwidth allowed for the specified
multicast channel(s). 8
show
Displays multicast bandwidth settings on
the device. 1
groupmacaddr del < vid > < group-mac-
addr >
Removes a static multicast group entry by
MAC address. 8
set < vid > < group-mac-
addr > < giga-
port >|< slot-port >
fix|forbid
Configures static MAC multicast to allow
incoming frames based on multicast MAC
address(es) that you specify. 8
show < vid > < group-mac-
addr >
Displays the settings of a static multicast
MAC address. 1
igmp disable
Turns off IGMP proxy or snooping. 8