ZyXEL Communications MSC1000G Series, User Manual

Page: 1011 / 1168

Chapter 33 switch Commands
Management Switch Card User’s Guide
1011
This command displays the LLDP settings and statistics. The following is an example.
33.9.9 switch lldp port adminstatus Command
Syntax:
switch lldp port adminstatus <port> disable|tx|rx|tx-rx
where
This command sets how the MSC uses LLDP on this port.
The following example sets the MSC’s port 2 to receive remote LLDP information.
33.9.10 switch lldp port flush Command
Syntax:
switch lldp port flush <port>
ras> switch lldp show
Status : active
TX Interval : 10 sec
TX Hold Time : 10 cycles
Reinit Delay : 5 sec
TX Delay : 16 sec
Notify Interval : 120 sec
port admin_st notify tlv
------ -------- ------- ------
enet1 disable enable 0xd51f
enet2 disable enable 0xd51f
enet3 disable enable 0xd51f
enet4 disable enable 0xd51f
enet5 disable enable 0xd51f
enet6 disable enable 0xd51f
enet7 disable enable 0xd51f
enet8 disable enable 0xd51f
Remote Tables Last Change Time : 00:00:00
Remote Tables Inserts : 0
Remote Tables Deletes : 0
Remote Tables Drops : 0
Remote Tables Ageouts : 0
disable
=
This has the MSC not send or receive LLDP information through this port.
tx
=
This has the MSC send local LLDP information through this port.
rx
=
This has the MSC receive remote LLDP information through this port.
tx-rx
=
This has the MSC send local LLDP information and receive remote LLDP
information through this port.
ras> switch lldp port adminstatus enet2 rx