ZyXEL Communications MSC1000G Series, User Manual

Page: 856 / 1168

Chapter 30 profile Commands
Management Switch Card User’s Guide
856
callsvc
set
< name >
[keypattern < pattern-
table >]
[nopassword | {password
< password >}
[registration off|{on
[< re >]}]
[numberplan off|on {< cc >
< ndc > < numberplan-table >}]
[localhelp off|on {< tel-
number > < localhelp-table >
[< tel-number > < localhelp-
table >...]}]
[dnd on|off]
[dtmf
bypass|rfc2833|sipinfo|rfc2
833like|plaintext]
[callhold on|off]
[callwait on|off]
[callreturn on|off]
[cidcw on|off]
[clip on|off]
[clir on|off]
[calltransfer on|off]
[conference on|off]
[callsvcmode europe|usa]
[onhooktransfer on|off]
[conftransfer on|off]
[fax t38|g711]
[firstdigit
< fdt >][interdigit < idt >]
[flash
invite|rfc2833|rfc2833like|
sipinfo1|sipinfo2|sipinfo3|
sipinfo4|{sipinfo5 [< rc >]}|
For the G and GB models:
Configures a new call service profile.
keypattern
: Enter the VoIP key pattern to
use.
Once the password configuration is set, it
cannot be changed.
nopassword
: No password is needed for SIP
registration.
password
: A password is needed for SIP
registration.
password
: The SIP registration password
(maximum 32 characters).
registration
: choose
on
and enter a time
period (
<re>
) to have the system use the
registration timeout feature. If the system
does not receive a registration confirmation
message from the SIP server in the time
specified, it drops the connection. Select
off
to not use the registration timeout feature.
numberplan
: Configures whether or not the
specified call service profile references a
numbering plan and, if so, which numbering
plan.
numberplan
: Turn number plan on or off.
cc
: Local country code. This defines the
digits the numbering plan inserts when a
rule contains “\c”.
ndc
: Local national destination code. This
defines the digits the numbering plan inserts
when a rule contains “\d”.
numberplan-table
: The name of the
numbering plan to use.
localhelp
: Turn the local help table feature
on or off. Specify the name of the local help
table you want users to access when they
call a specific telephone number.
dnd
: Turn Do not Disturb on or off.
bypass
: Do not relay DTMF signals.
rfc2833
: Sets the system to relay DTMF
tones according to RFC2833.
sipinfo
: Sets the system to relay DTMF
signals via SIP INFO message.
rfc2833like
: Sets the system to relay
DTMF signals via SIP INFO but carrying
RFC2833 payload.
8
Table 366
profile Commands (continued)
COMMAND DESCRIPTION P