ZyXEL Communications MSC1000G Series, User Manual

Page: 917 / 1168

Chapter 30 profile Commands
Management Switch Card User’s Guide
917
30.22.5 profile voip sip callsvc set Command (MSC1024GC)
Syntax:
profile voip sip callsvc set < profile >
[keypattern < pattern-table >]
[registration off|{on [< re >]}]
[dialplan off|on {< cc > < ndc > < dialplan-table >}]
[localhelp off|on {< tel-number > < localhelp-table >
[< tel-number > < localhelp-table >...]}]
[dnd on|off]
[dtmf bypass|rfc2833|sipinfo|rfc2833like|plaintext]
[callhold on|off]
[callwait on|off]
[callreturn on|off]
[clip on|off]
[clir on|off]
[calltransfer on|off]
[conference on|off]
[fax t38|g711]
[firstdigit < fdt >]
[interdigit < idt >]
[flash invite|rfc2833|rfc2833like|sipinfo1|sipinfo2|sipinfo3|sipinfo4|{sipinfo5
[< rc >]}|{sipinfo6 [< si >]}
[localcall on|off]
[mwi on|off]
[centrex on|off]
where
keypattern
=
Has the call service profile use a VoIP key pattern.
<pattern-
table>
=
Specify the VoIP key pattern to use.
registration
= Choose
on
and enter a time period (
<re>
) to have the system use the registration
timeout feature. If the system does not receive a registration confirmation message
from the SIP server in the time specified, it drops the connection.
Select
off
to not use the registration timeout feature.
re
= This is the registration expiration time in seconds, 120~65535.
dialplan
= When this is
off
, the call service profile does not reference a configured dailing plan.
When this is
on
, the call service profile references the specified dialing plan.
< cc >
=
The country code. This defines the digits the numbering plan inserts when a rule
contains “\c”.
< ndc >
= The national destination code. This defines the digits the numbering plan inserts when a
rule contains “\d”.
< dialplan-
table >
=
The dailing plan this call service set is to use.
localhelp
= When this is
off
, the call service profile does not have users access a local help table
when they call a specific telephone number.
To have this call service profile use a local help table, choose
on
and specify a
telephone number (
tel-number
) and the name of the local help table (
localhelp-
table
) users are to access when they call the telephone number.
< tel-number >
= The local help telephone number, up to 15 characters.