ZyXEL Communications MSC1000G Series, User Manual

Page: 756 / 1168

Chapter 29 port Commands
Management Switch Card User’s Guide
756
Table 364
port Commands
COMMAND DESCRIPTION P
port adsl alarmprof < slot-port >
< alarmprofile >
Applies an ADSL alarm profile to the subscriber
port. 8
annexl disable < slot-port >
Turns off the Annex L reach extended feature. 8
enable < slot-port >
[narrow]
Turns on the Annex L reach extended feature. If
‘
narrow
’ is not specified then Annex L mode will be
enabled in ‘wide’ PSD mode.
8
annexm disable < slot-port >
Turns off the Annex M double upstream feature. 8
enable < slot-port >
Turns on the Annex M double upstream feature
(upstream tones from 6 to 63). 8
annexi disable < slot-port >
Turns off the Annex I all digital mode feature. 8
enable < slot-port >
Turns on the Annex I all digital mode feature. 8
dscarrier0 <slot-port> <m1> <m2>
<m3> <m4> <m5> <m6>
<m7>
Disables downstream carrier tones from 33 to 255.
m1~m7
: carrier tones, 0~ffffffff,
'1' disables the corresponding tone.
8
dscarrier1 < slot-port > <m1> <m2>
<m3> <m4> <m5> <m6>
<m7>
Disables downstream carrier tones from 256 to
511.
m1~m7
: carrier tones, 0~ffffffff,
'1' disables the corresponding tone.
8
inpmin < slot-port > < us_inp >
< ds_inp >
Sets the upstream and downstream Impulse Noise
Protection minimum setting
us_inp
: The minimum upstream impulse noise
protection setting (0~6).
ds_inp
: The minimum downstream impulse noise
protection setting (0~6).
8
optionmask < slot-port >
< option_mask >
Sets option mask attributes on a line card port. 8
pmm disable < slot-port >
Turns off the power management mode. 8
enable < slot-port >
[L2|L3]
Turns on the power management mode.
L2
: power management mode L2
L3
: power management mode L2 and L3
8