ZyXEL Communications MSC1000G Series, User Manual

Page: 283 / 1168

Chapter 9 Subscriber Port Setup Screens
Management Switch Card User’s Guide
283
9.22 The VoIP SIP Port Setup Screen
Use this screen to manage and configure the VoIP settings of each port on your SIP (Session
Initiation Protocol) enabled line card(s). Click
Port > VoIP SIP . The following screen displays.
Member Port This link displays the ports configured to a group. If no ports have been configured to a group,
the link will show “
None ”.
Click this link to display a popup screen. Select the port(s) in this screen to allocate them to
the DSL line group.
Ports may not be shared between line groups. For example, if port 1 belongs to “Group1”, it
may not belong to “Group2”.
Click Apply to save your settings.
New Click New to configure a new group.
Delete Click Delete to delete the group entry displayed.
Cancel Click Cancel to start configuring this section of the screen again.
Apply Click Apply to create the G.bond entry.
Clicking Apply saves your changes to the MSC’s volatile memory. The MSC loses these
changes if it is turned off or loses power, so use the Config Save link on the navigation panel
to save your changes to the non-volatile memory when you are done configuring.
ID This field displays the number of the selected line card slot.
State This field displays the line card’s current operational status.
active means the line card is operating normally.
init means the MSC is initializing the line card.
disable means a manager has disabled the line card.
inactive means the line card is starting up or is not operating normally. This could be due to
the card starting, a firmware upgrade in progress or a malfunction. See Chapter 38 on page
1105 for what to do if the line card stays stuck in the inactive state.
Card Type This field displays the type of a line card.
Up Time This field displays how long the line card has been running since the last time it was started.
Firmware This field displays the current firmware version installed on the line card.
Table 128
Port > G.bond
LABEL DESCRIPTION