ZyXEL Communications MSC1000G Series, User Manual

Page: 857 / 1168

Chapter 30 profile Commands
Management Switch Card User’s Guide
857
{sipinfo6 [< si >]}
[localcall on|off]
[mwi on|off]
[reanswer < ra >]
For the G and GB models. Continued:
callhold
: Turn call holding on or off.
callwait
: Turn call waiting on or off.
callreturn
: Turn call return on or off.
cidcw
: Turn Calling Identity Delivery on Call
Waiting on or off.
clip
: Turn Caller ID presentation on or off.
clir
: Allows (
on
) or prohibits (
off
) caller ID
restriction.
calltransfer
: Turn call transferring on or
off.
conference
: Allows (
on
) or prohibits (
off
)
conference calls.
callsvcmode
: Set supplementary phone
services to European or American mode.
g711
: Relay fax signals via ITU-T G.711.
t38
: Relay fax signals via ITU-T T.38.
firstdigit
: Set the number of seconds a
person has to dial the first digit after taking
the phone off-hook.
interdigit
: Set the number of seconds a
person has between dialing digits.
flash
: Select the method for processing a
flash signal from a user.
invite
: relay flash by SIP INVITE signal.
rfc2833
: relay flash according to RFC 2833.
rfc2833like
: relays flash in SIP INFO
packets, but carried as RFC 2833 payload
sipinfo1
: relays flash in SIP INFO packets
(a
signal=16
message)
sipinfo2
: relays flash in SIP INFO packets
(a
signal=hf
message)
sipinfo3
: relays flash in SIP INFO packets
(a
signal=hook-flash
message)
sipinfo4
: relays flash in SIP INFO packets
(a plain text “
FLASH
” message).
sipinfo5
: relays flash in SIP INFO packets
(multiple SIP messages). The message
content is determined by the characters you
enter for
<rc>
. A separate SIP INFO
message is sent for each character you
enter.
Table 366
profile Commands (continued)
COMMAND DESCRIPTION P