ZyXEL Communications MSC1000G Series, User Manual

Page: 77 / 1168

Chapter 3 The Web Configurator
Management Switch Card User’s Guide
77
3.7 Enable Privilege Screen
Each Web Configurator screen requires a privilege level to access.
• Privilege level 1 access is read-only.
• Privilege level 8 access lets you view most screens and configure general features.
• Privilege level 14 access lets you view all the screens and configure all settings including creating
administrator accounts, restarting the system, and resetting the factory defaults.
When the system uses a server to authenticate administrator logins, you automatically
have the lowest privilege level (1) when you log into the Web Configurator.
When the system uses its local database to authenticate administrator logins, you automatically
have your account’s assigned privilege level when you log into the Web Configurator.
In either case you can use the Enable Privilege screen to change your privilege level for your
current Web Configurator session. Click Enable at the top of the Home ( System Info ) screen to
open the Enable Privilege screen.
Figure 24
Enable Privilege
Firmware Version This field displays the version number of the device’s current firmware including the date
created.
DSL Driver
Version This field displays the version number of the line card’s driver.
DSL Modem
Version This field displays the version number of the line card’s modem code.
Mac Address This field displays the MAC address of the line card. Each line card on the IES-5000 and
IES-6000 has one and only one MAC address.
Current Voltage
Level This field displays the current voltage readings.
Current
Temperature This field displays the current temperature at the sensors.
Current Fan
Speed This field is not applicable for line cards. This field displays the current fan speeds.
Table 6
System Info: Slot (continued)
LABEL DESCRIPTION