ZyXEL Communications MSC1000G Series, User Manual

Page: 1038 / 1168

Chapter 34 sys Commands
Management Switch Card User’s Guide
1038
34.3 sys Commands
Use these commands for system management and maintenance.
34.3.1 sys version Command
Syntax:
sys version
timeout <0~360>
Specify for how many minutes an administrator’s
configuration session can remain idle before the
system automatically logs the administrator out. 14
time set < hh > [< mm > [< ss >]]
Sets the system time. 8
show
Displays the current system time. 1
timeserver set none
Clears the time server settings. 8
daytime < ip-
address > [ sync ]
or
time|ntp < ip-
address > <utc[<+|-
>0100~1200]>
[sync]
Sets the time service protocol and IP address of a
time server.
sync:
Gets the time and date.
8
show
Displays the time server settings. 1
sync
Gets the time and date from a predefined time
server. 8
user delete < name >
Removes a user account. 14
disable < name >
Stops a user from logging in. 14
enable < name >
Allows a user to log in. 14
online
Displays information about online users that are
logged into the switch. * denotes your session. 1
set < username >
< password >
< privilege >
Sets a user account and its level of access
privileges (1 ~ 14). 14
show
Displays authentication settings and user
accounts. 1
version
Displays the system’s general information such as
the model name and firmware version. 1
Table 387
sys Commands (continued)
COMMAND DESCRIPTION P