ZyXEL Communications MSC1000G Series, User Manual

Page: 724 / 1168

Chapter 25 ip Commands
Management Switch Card User’s Guide
724
where
This command removes a static, IP forwarding route.
The following example removes a static route for destination IP address 123.23.19.233 through a
gateway at IP address 123.23.15.253.
25.2.6 ip route set Command
Syntax:
ras> ip route set < dst-ip >[/< netmask >] < gateway-ip > [< metric >] [< name >]
where
This command defines a new, static IP forwarding route or edits an existing one.
The following example creates a static route named “statroute1” to send traffic for destination IP
address 123.23.19.233 through a gateway at IP address 123.23.15.253.
25.2.7 ip route show Command
Syntax:
ras> ip route show
This command displays the system’s routing table. An example is shown next.
< dst ip >
= The destination IP address of packets to which this static route applies.
[/ netmask ]
= The destination subnet mask of packets to which this static route applies.
< gateway >
= The IP address of the gateway that you want to send the packets through.
ras> ip route delete 123.23.19.233 123.23.15.253
< dst ip >
= The destination IP address of packets that this static route is to route.
[/< netmask >]
= The destination subnet mask of packets that this static route is to route.
< gateway-ip >
=
The IP address of the gateway that you want to send the packets through.
[< metric >]
= The metric (hop count) of this static route.
[< name >]
= A name to identify this static route. Up to 31 English keyboard characters.
Spaces and tabs are not allowed.
ras> ip route set 123.23.19.233 123.23.15.253 statroute1
ras> ip route show
dest interface gateway metric name
------------------ ---------- --------------- ------ ----------------
123.23.15.0/24 outband 123.23.15.86 1 -
123.23.19.233 outband 123.23.15.253 5 statroute1
192.168.1.0/24 inband 192.168.1.2 1 -
default outband 123.23.15.254 1 -