ZyXEL Communications MSC1000G Series, User Manual

Page: 847 / 1168

Chapter 30 profile Commands
Management Switch Card User’s Guide
847
show [< profile >]
Displays an alarm VDSL2 line profile. 1
template delete < profile >
Removes an alarm VDSL2 template. 8
map < profile >
Displays an alarm VDSL2 template’s
mappings. 8
set < name > < line-profile >
< chan-profile >
Creates an alarm VDSL2 template. 8
show [< profile >]
Displays an alarm VDSL2 template. 1
atm delete < profile >
Removes an unreferenced ATM traffic profile. 8
map < profile >
Displays which ports reference this ATM
profile. 1
set < atmprofile > cbr|ubr < pcr >
< cdvt >
or
< atmprofile > rt-vbr|nrt-vbr
< pcr > < cdvt > < scr > < bt >
Creates a profile of ATM traffic settings.
cbr
: constant cell rate
ubr:
unspecified cell rate
rt-vbr
: real time variable bit rate
nrt-vbr
: non-real time variable bit rate
pcr :
peak cell rate (150~300000)
scr :
sustainable cell rate, (150~300000)
cdvt :
cell delay variation tolerance,
(0~255).
bt :
burst tolerance (0~255).
Note: use “*” to set
pcr
,
cdvt
,
scr
and
bt
to
the default value.
8
show [< profile >]
Lists the ATM traffic profiles or a specific
profile’s settings. 1
igmpfilte
r
delete < igmpfilter >
Removes an unreferenced IGMP filter profile.
IGMP filter profiles allow you to control
access to IGMP multicast groups.
8
map < igmpfilter >
Displays which ports reference this IGMP
filter profile. 1
set < igmpfilter > < index >
< startip > < endip >
Creates an IGMP filter profile of ATM traffic
settings.
igmpfilter :
profile name
index :
index of addresses (1~128).
startip
:
start of address range
endip :
end of address range
8
show [ igmpprofile ]
Lists the IGMP filter profiles or a specific
profile’s settings. 1
ipqos delete < profile >
Deletes a specified IPQoS profile.
profile
: The name of a QoS profile
configured using the
profile
command.
8
Table 366
profile Commands (continued)
COMMAND DESCRIPTION P