ZyXEL Communications MSC1000G Series, User Manual

Page: 273 / 1168

Chapter 9 Subscriber Port Setup Screens
Management Switch Card User’s Guide
273
9.19 IPBPVC Screen
Use this screen to set up and maintain PVCs for subscribers in an IP bridge.
To open this screen, click Port > IP Bridge > IPBPVC .
Figure 174
IPBPVC
Slot This field displays the number of the slot where the line card is located. It displays “ - ” if the
MSC looks for the subscriber in the whole VLAN and not a specific PVC.
Port This field displays the number of the ADSL port on the line card to which the MSC forwards
frames. It displays “
- ” if the MSC looks for the subscriber in the whole VLAN and not a
specific PVC.
VPI/VCI This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI), if any.
The VPI and VCI identify a channel on this port.
Select
Modify
Delete
Select the radio button in the Select column for an entry and click Modify to be able to edit
the entry or Delete to remove it.
Page X of X This identifies which page of information is displayed and the total number of pages of
information.
Previous/Next Click one of these buttons to show the preceding/following screen if the information cannot
be displayed in one screen.
Table 123
IPB Interface (continued)
LABEL DESCRIPTION