ZyXEL Communications MSC1000G Series, User Manual

Page: 761 / 1168

Chapter 29 port Commands
Management Switch Card User’s Guide
761
xvlan delete < slot-port >
< cvid >
Removes the specified XVLAN entry (cvid) from the
specified port.
Note: These
port enet xvlan
commands only
support the GLC1320G-55 line cards.
8
set < slot-port >
< cvid > < svid >
Creates an XVLAN entry for the specified port.
cvid
is the original customer VLAN ID. When the
port receives traffic from the subscriber with a
cvid
VLAN tag, XVLAN changes it to the
svid
before forwarding it to the service provider’s
network.
8
show < slot-port >
Displays the XVLAN settings for the specified port. 8
gbond delete < slot > < bond_name >
Removes G.bond settings from the DSL lines
specified in the G.bond group.
bond_name
: The name of a DSL line group with
G.bond configured on them.
8
set set < slot >
< bond_name >
< portlist >
Configures a G.bond group or modifies the
membership of a G.bond group.
portlist
: A list of ports, for example, (1,2),
(5~7).
8
show < slot > [< bond_name >]
Shows G.bond settings on the specified port. 1
h248 set < slot-port >
< dsp_profile >
[dataprofile
< data_profile >]
Sets which DSP (Digital Sound Processing) profile
the specified
H.248 ports use for voice traffic. You
can also set the DSP profile for data (fax and
modem) traffic.
8
termination < slot-port > < name >
[< step >]
Sets termination names for H.248 ports. 8
ipbpvc arpproxy flush all |edgerouter
[< ip-address > < vid >]
|interface [< ip/mask >
< vid >]
Manually flushes the learned MAC addresses from
the ARP table. 8
age < sec >
Sets the valid time interval for learned MAC
addresses in the ARP table (10~10000 in
seconds). 8
show
Displays the number of seconds a learned MAC
address remains valid in the ARP table. 8
delete < slot-port-vpi/vci >
Removes the specified IP aware Bridge PVC. 8
domain delete < domain-name >
Removes the specified domain. First delete all
VLANs belonging to this domain. 8
dhcpvlan disable
< domain name >
Disables DHCP VLAN in a domain. 8
dhcpvlan enable
< domain name > < vid >
Enables DHCP VLAN in a domain. 8
set < domain name >
Creates a domain with maximum 8 domains in the
system. 8
show[< domain name >]
Displays domain settings. 1
vlan < domain name >
< vid > < registration >
Sets a VLAN to join or leave a specified domain
with maximum 8 VLANs in one domain. 8
Table 364
port Commands (continued)
COMMAND DESCRIPTION P