ZyXEL Communications MSC1000G Series, User Manual

Page: 728 / 1168

Chapter 26 ip6 Commands
Management Switch Card User’s Guide
728
26.2 ip6 Commands
The following shows general IPv6 commands that help with the management of the IPv6
parameters.
26.2.1 ip6 gateway Command
Syntax:
ras> ip6 gateway < ip-address >
This command sets the system’s default gateway IPv6 address.
The following example sets the system to use 2001:db8:1a2b:15::1a2f:0 as the default gateway.
26.2.2 ip6 if default set Command
Syntax:
ras> ip6 if default set <inband|outband>
This command sets the system’s link-local packet default interface.
The following example sets the system to use inband for the link-local packet default interface.
26.2.3 ip6 ping Command
Syntax:
ras> ip6 ping < ip-address > [count]
where
This is an IP facility to check for network functionality by sending an echo request to another IPv6
host and waiting for the reply.
ras> ip6 gateway 2001:db8:1a2b:15::1a2f:0
ras> ip6 if default set inband
< ip-address >
=
The IP address of the target.
[c ount ]
=
The number of pings you want the system to send.