ZyXEL Communications MSC1000G Series, User Manual

Page: 1064 / 1168

Chapter 36 voip Commands
Management Switch Card User’s Guide
1064
master <slot> < ip-address
1> < ip-address 2>
Configures a media card in the selected slot to
work with the interface’s signaling cards.
< ip-address 1>
: Primary signaling card’s IP
address.
< ip-address 1>
: Secondary signaling card’s IP
address.
8
opmode <slot> mc|sc
Sets the card as a media card or a signaling card.
A signaling card can also function as a media
card. 8
priority <slot> <pbit>
<dscp>
Sets the IEEE 802.1p priority (0~7) and DSCP
code point (0~63) to use for this VoIP card’s
H.248 signaling packets. 8
show [< slot >]
Lists the H.248 VoIP cards and their operational
modes. Specify a H.248 VoIP card’s slot number
to show it’s general H.248 settings.
ip set < slot > < ip-
address >[/
< netmask >] < vid >
Sets the IP address and VLAN ID of the specified
slot. 8
dns < slot > < dns-ip >
Sets the DNS server IP address for the specified
slot. 8
show < slot >
Shows the IP address, VLAN ID and DNS server
details for the specified slot. 1
pots flash set DEFVAL|{< min >
< max> }
Sets how long (in milliseconds) a user has to
press the flash key to register its use.
DEFVAL
uses the period defined in the country code
setting.
8
show
Displays how long (in milliseconds) a user has to
press the flash key to register its use. 8
pots ring name < index >
DEFVAL|< name >
Sets the name of the specified POTS ring pattern.
DEFVAL
uses the default name according to the
country code setting.
8
pattern < index > DEFVAL
Sets the specified POTS ring pattern to use the
default ring cadence according to the country
code setting. 8
< index > < on1 >
< off1 >
Sets the specified POTS ring pattern to use one
ring period and silent interval. Enter the lengths in
milliseconds of the first period of ringing, and the
first silent interval. 8
< index > < on1 >
< off1 > < on2 >
< off2 >
Sets the specified POTS ring pattern to use two
ring periods and two silent intervals. Enter the
lengths in milliseconds of the first period of
ringing, the first silent interval, the second period
of ringing, and the second silent interval. 8
< index > < on1 >
< off1 > < on2 >
< off2 > < on3 >
< off3 >
Sets the specified POTS ring pattern to use three
ring periods and three silent intervals.Enter the
lengths in milliseconds of the first period of
ringing, the first silent interval, the second period
of ringing, the second silent interval, the third
period of ringing, and the third silent interval. 8
show
Shows the POTS ring patterns. 1
voltage DEFVAL|< voltage >
MSC1024GC only. Shows the POTS ring voltage. 8
Table 390
voip Commands (continued)
COMMAND DESCRIPTION P