ZyXEL Communications MSC1000G Series, User Manual

Page: 822 / 1168

Chapter 29 port Commands
Management Switch Card User’s Guide
822
The following example sets port 1 in card 4 to use “sip-example” SIP user account.
29.34 port sip opmode Command
Syntax:
port sip opmode < slot-port > <DEFVAL|v5sip>
where
This command sets the operation mode of a VoIP port.
The following example sets card 3’s port 5 to use V5.2.
29.35 port sip hotline Command
Syntax:
port sip hotline <slot-port> off| [ on <hotline-no> <timeout> ]
where
This command turns on or off the hotline of a port on a VoIP line card. You can set the hotline number and its
timeout value if it is turned on.
29.36 port sip password Command
Syntax:
port sip password < slot-port > < password >
ras> port sip account 4-1 sip-example
DEFVAL
=
Configures the port to use SIP to connect to a server.
v5sip
=
Configures the port to use V5.2 to connect to a traditional class 5 POTS switch.
ras> port sip opmode 3-5 v5sip
< hotline-no >
=
Sets the the hotline of a port on a VoIP line card. <=31 characters, only
alphanumeric characters and '+' are allowed or use two quotation marks () to
clear the field.
Note: '+' is only allowed at the first character.
<timeout>
= Sets the hotline timeout, 0~255 seconds, 0 means dial immediately.