ZyXEL Communications MSC1000G Series, User Manual

Page: 859 / 1168

Chapter 30 profile Commands
Management Switch Card User’s Guide
859
callsvc
set
< profile > [keypattern
< pattern-table >]
[registration off|{on < re >}
[dialplan off|on {< cc >
< ndc > < dialplan-table >}]
[localhelp off|on {< tel-
number > < localhelp-table >
[< tel-number > < localhelp-
table >...]}]
[dnd on|off]
[dtmf
bypass|rfc2833|sipinfo|rfc2
833like|plaintext]
[callhold on|off]
[callwait on|off]
[clip on|off]
[clir on|off]
[calltransfer on|off]
[conference on|off]
[fax t38|g711]
[firstdigit < fdt >]
[interdigit < idt >]
[flash
invite|rfc2833|rfc2833like|
sipinfo1|sipinfo2|sipinfo3|
sipinfo4|{sipinfo5 [< rc >]}|
For the MSC1024GC.
Configures a new call service profile.
keypattern:
Enter the VoIP key pattern to use.
pattern-table:
The VoIP keypattern table
name (<=31 characters).
registration
:
choose
on
and enter a time period (
< re >
) to have
the system use the registration timeout feature. If
the system does not receive a registration
confirmation message from the SIP server in the
time specified, it drops the connection. Select
off
to not use the registration timeout feature.
dialplan:
Turn the dial plan table feature on or
off.
dialplan-table:
The dialing plan table name
(<=31 characters).
tel-number:
The local help telephone number
(<= 15 characters, only digit characters are allowed
and before call is disconnected).
localhelp
: Turn the local help table feature on or
off. Specify the name of the local help table you
want users to access when they call a specific
telephone number.
localhelp-table:
The local help table name
(<=31 characters).
cc
: Local country code. This defines the digits the
numbering plan inserts when a rule contains “\c”.
ndc
: Local national destination code. This defines
the digits the numbering plan inserts when a rule
contains “\d”.
dnd
: Turn Do not Disturb on or off.
dtmf bypass
: Do not relay DTMF signals.
rfc2833
: Sets the system to relay DTMF tones
according to RFC2833.
sipinfo
: Sets the system to relay DTMF signals
via SIP INFO message.
rfc2833like
: Sets the system to relay DTMF
signals via SIP INFO but carrying RFC2833
payload.
8
Table 366
profile Commands (continued)
COMMAND DESCRIPTION P