ZyXEL Communications MSC1000G Series, User Manual

Page: 944 / 1168

Chapter 32 show Commands
Management Switch Card User’s Guide
944
32.3.10 show gbond Command
Syntax:
show gbond < slot > [< gbond_name >]
This command displays G.bond settings for the card inserted into the specified slot and, if specified,
a G.bond group.
NUcastPkts
This is the number of good non-unicast frames received/transmitted.
MCastPkts
This is the number of good multicast frames received/transmitted of 64 to 1518 octets in
length (for non VLAN) or 1522 octets (for VLAN), not including Broadcast frames. Frames
with range or length errors are also not taken into account.
BCastPkts
This is the number of good broadcast frames received/transmitted of 64 to 1518 octets in
length (for non VLAN) or 1522 octets (for VLAN), not including multicast frames. Frames
with range or length errors are also not taken into account.
Pause
This is the number of valid IEEE 802.3x Pause frames received/transmitted on this port.
Pkt64
This is the number of frames received/transmitted (including bad frames) that were 64
octets or less in length (this includes FCS octets but excludes framing bits).
Pkt65~127
This is the number of frames received/transmitted (including bad frames) that were 65 to
127 octets in length (this includes FCS octets but excludes framing bits).
Pkt128~255
This is the number of frames received and transmitted (including bad frames) that were
128 to 255 octets in length (this includes FCS octets but excludes framing bits).
Pkt256~511
This is the number of frames received/transmitted (including bad frames) that were 256
to 511 octets in length (this includes FCS octets but excludes framing bits).
Pkt512~1023
This is the number of frames received/transmitted (including bad frames) that were 512
to 1023 octets in length (this includes FCS octets but excludes framing bits).
Pkt1024~1518
This is the number of frames received/transmitted (including bad frames) that were 1024
to 1518 octets in length (this includes FCS octets but excludes framing bits).
OverSizPkt
This is the number of frames received/transmitted that were bigger than 1518 (non VLAN)
or 1522 (VLAN) octets and contained a valid FCS.
UndSizPkt
This is the number of frames received/transmitted that were less than 64 octets long and
contained a valid FCS.
FCSErr
This is the number of frames received/transmitted with an integral length of 64 to 1518
octets and containing a Frame Check Sequence error.
AlignErr
This is the number of frames received/transmitted that were 64 to 1518 (non VLAN) or
1522 (VLAN) octets long but contained an invalid FCS and a non-integral number of
octets.
Jabber
This is the number of frames received/transmitted that were longer than 1518 octets (non
VLAN) or 1522 octets (VLAN) and contained an invalid FCS, including alignment errors.
Fragment
This is the number of frames received/transmitted that were less than 64 octets long, and
contained an invalid FCS, including non-integral and integral lengths.
Dropped
This is the number of received/transmitted frames that were received by the system, but
later dropped because of a lack of system resources.
Underrun
This is the number of outgoing frames that were less than 64 octets long.
ExCollisn
This is the number of frames for which transmission failed due to excessive collisions.
Excessive collision is defined as the number of maximum collisions before the
retransmission count is reset.
Table 374
show enet Command Display (continued)
LABEL DESCRIPTION