ZyXEL Communications MSC1000G Series, User Manual

Page: 788 / 1168

Chapter 29 port Commands
Management Switch Card User’s Guide
788
29.10.4 port enet dot3ad enable Command
Syntax:
port enet dot3ad enable < slot > t1|t2|…|t10 [lacp]
This command
tu
rns on link aggregation on the specified subscriber port trunk group. Use
lacp
to
turn on LACP protocol.
This example turns on link aggregation on the t1 trunk group on an ELC in slot 4.
29.10.5 port enet dot3ad show Command
Syntax:
port enet dot3ad show < slot >
This command displays the link aggregation settings for the Ethernet (ELC) in the specified slot.
This example displays the link aggregation settings for the Ethernet (ELC) in slot 4.
29.10.6 port enet flowctrl disable Command
Syntax:
port enet flowctrl disable < slot-port >
This command turns off flow control on an Ethernet (ELC) subscriber port.
The following example turns off the flow control on port 5 on the ELC in slot 4.
ras> port enet dot3ad enable 4 t1
ras> port enet dot3ad show 4
agg enable type port
---- ------ ------- -----------------------------------------------
t1 - static 4-1 4-2 4-3 4-4
t2 - static
t3 - static
t4 - static
t5 - static
t6 - static
t7 - static
t8 - static
t9 - static
t10 - static
ras> port enet flowctrl disable 4-5