ZyXEL Communications MSC1000G Series, User Manual

Page: 823 / 1168

Chapter 29 port Commands
Management Switch Card User’s Guide
823
where
This command sets a port on the VoIP line card to use the specified password with its SIP user
name.
The following example sets port 1 in card 4 to use “sip-test” as its SIP password.
29.37 port sip polarityreverse Command
Syntax:
port sip polarityreverse < slot-port > <on|off>
Use this command to turn polarity reversal on or off. Turn on polarity reversal to reverse the tip and
ring after a call is established and again after it terminates. This is used for example, as a charging
signal for some types of payphone.
29.38 port sip set Command
Syntax:
port sip set < slot-port > < sip-profile > < svc-profile > [< dsp-profile >]
where
This command sets a port on the VoIP line card to use the specified SIP, call service and DSP
profiles. By default, the VoIP line card’s ports use the profile “DEFVAL” for all three kinds of profile.
The following example sets port 5 in card 4 to use the “sip123” SIP profile and the “svc456” call
service profile.
< password >
= The password for registering the SIP account this port uses.
ras> port sip account 4-1 sip-test
< sip-profile >
=
The name of a SIP profile.
< svc-profile>
=
The name of a call service profile.
< dsp-profile >
=
The name of a digital signal processing profile.
ras> port sip set 4-5 sip123 svc456