ZyXEL Communications MSC1000G Series, User Manual

Page: 849 / 1168

Chapter 30 profile Commands
Management Switch Card User’s Guide
849
set < profile > vcshaping < level >
< max-rate > < depth >
Sets the VC (Virtual Circuits) shaping level,
maximum rate, and depth of a IPQoS2
profile.
level: The associated PVC level.
max-rate:
The maximum rate of the
queue.
depth:
The maximum number of packets.
8
queue < profile > < id >
< weight >|< max-rate > < depth >
Sets the parameters of a queue for a
specified IPQoS2 profile.
id
: The queue index beginning at 0. For
example, if you have configured 4 queues
for a profile, then you can enter a
id
from 0
to 3.
weight
: The queue’s queue weight.
max-rate:
The maximum rate of the
queue.
depth:
The maximum number of packets.
8
show [ profile ]
Displays all configured IPQoS2 profiles or a
specified profile. 1
profsvr show
Displays the current profile server setting. 1
mode client|server
Sets the profile server operation mode. 8
clientlis
t
set < ip-address > <type>
Adds an entry to the profile server client list. 8
delete < ip-address >
Removes an entry from the profile server
client list. 8
show
Displays the profile server client list. 1
serverset < ip-address >
Sets the target profile server IP address for
synchronization. 8
sync
Synchronizes with the profile server. 8
qratelimi
t
delete < profile >
Removes the specified per-queue rate limit
profile. 8
map < profile >
Displays the port(s) to which the specified
per-queue rate limit profile is applied. 1
set < profile >
[q0|q1|q2|q3|q4|q5|q6|q7
< cir > < pir >]
Configures the specified per-queue rate limit
profile.
cir
: per-queue CIR in kbps, 0 means no
limit, 0~100032 in steps of 64 kbps.
pir
: per-queue PIR in kbps, 0 means no
limit, 0~100032 in steps of 64 kbps.
8
show [<profile>]
Displays the specified per-queue rate limit
profile’s settings. 1
ratelimit delete < profile >
Removes the specified Ethernet subscriber
port rate limit profile. 8
map < profile >
Displays the Ethernet subscriber port(s) to
which the specified rate limit profile is
applied. 8
Table 366
profile Commands (continued)
COMMAND DESCRIPTION P