ZyXEL Communications MSC1000G Series, User Manual

Page: 738 / 1168

Chapter 28 multicast Commands
Management Switch Card User’s Guide
738
show < slot >|< slot - port >
Displays IGMP control message statistics
for the specified slot or port. 1
ipv6passthro
ugh
set flood|drop|disable
Sets how to handle IPv6 multicast packets.
flood
: Forwards all IPv6 multicast packets
to all ports.
drop
:Drops all IPv6 multicast packets.
disable
: Handles IPv6 multicast packets
depending on the following settings:
• Static MAC multicast, configured using
the
multicast mvlan set
command.
• Unkonwn multicast, configured using
the
multicast mvlan nonmemberport
commands
8
show
Displays the setting of IPv6 multicast
packet forwarding. 1
mvlan delete < vid >
Removes a multicast VLAN. 8
disable < vid >
Deactivates a multicast VLAN. 8
enable < vid >
Activates a multicast VLAN. 8
group delete < vid >
< index >
Removes a multicast VLAN group. 8
set < vid > < index >
< start-mcast-ip >
< end-mcast-ip >
Sets a multicast VLAN group. 8
name < name >
Sets the name of the multicast VLAN
setting. 8
nonmemberp
ort
<pass|discard>
Set whether to process IGMP/MLD packets
if the destined multicast group belongs to
an MVLAN, but the port which received the
IGMP/MLD packets is not a member of the
MVLAN.
pass
: Forwards the IGMP/MLD packets in
the original VLAN.
discard
: Drops the IGMP/MLD packets.
1
priority < vid > < priority >
Changes the 802.1p priority to the same
level as what you configured for IGMP/MLD
pakcets for the MVLAN. 8
set < vid > < slot-port >
<fix
[ cvid ]|forbid>
Sets the port multicast group membership
settings.
fix [ cvid
]: Adds the port to the specified
VLAN group.
cvid
: The customer VLAN ID.
forbid
: Remove the port from the
specified VLAN group.
8
show < vid > [ slot ]
Displays the multicast VLAN settings for all
slots or only for the specified slot. 1
Table 362
multicast Commands (continued)
COMMAND DESCRIPTION P