ZyXEL Communications MSC1000G Series, User Manual

Page: 322 / 1168

Chapter 10 IMA Screens
Management Switch Card User’s Guide
322
10.6 The DTPVC Setup Screen
Click IMA > DTPVC in the navigation panel to open the following screen. Use this screen to
configure double-tagged PVC settings used by an IMA line card for mapping a double-tagged frame
with a PVC (channel).
Figure 212
DTPVC Setup
The following table describes the fields in this screen.
Profile This field displays the ATM profile that this channel uses.
PVID / Priority This field displays the service provider’s VLAN ID and priority settings that this channel uses.
• The PVID here is the service provider’s VLAN ID (the outer VLAN tag) that the line card
assigns to untagged frames received on this PVC.
• Priority is the IEEE 802.1p priority level for the service provider tag that the line card
adds to untagged frames that come in on this PVC. "0" is the lowest priority level and "7"
is the highest.
MUX This field displays the encapsulation type ( llc or vc ) for this channel.
Select Select one or more PVCs’ check boxes and then use the Delete button to remove it (or
them). Use the Select All check box to select all of the PVCs for all of the line card’s groups.
Table 150
IMA > PVC Setup: Slot (continued)
LABEL DESCRIPTION
Table 151
DTPVC Setup
LABEL DESCRIPTION
DTPVC Table This table displays the PVC settings that are configured for the selected IMA group.
Slot Select the number of an IMA line card’s slot. The corresponding group setup screen for the
type of line card you selected automatically displays.
Group Select the number of an IMA group on the line card.
Load Click Load to display the group’s PVC settings in the DTPVC Table .
Index This is the number of the PVC on this group.