ZyXEL Communications MSC1000G Series, User Manual

Page: 1026 / 1168

Chapter 33 switch Commands
Management Switch Card User’s Guide
1026
33.14.8.7 switch port mstp show Command
Syntax:
switch port mstp show < mstid > [< end_mstid >]
This command displays the specified MSTP’s settings on each Gigabit Ethernet interface. The
following example displays the port MSTP setting for spanning tree 10.
33.14.9 switch port name Command
Syntax:
switch port name < giga-port > < name >
where
This command sets the name of a Gigabit Ethernet interface.
The following example sets the name of uplink interface 1 to
xyz
.
33.14.10 switch port priority Command
Syntax:
switch port priority < giga-port > < priority >
where
This command sets the default ingress user priority of a Gigabit Ethernet interface.
The following example sets the default priority of uplink interface 1 to 3.
ras> switch port mstp show 10
[msti 10]
port en prio pathcost
---- ---- ---- ---------
sub1 - 128 0
sub2 - 128 0
up1 V 128 16
up2 - 128 0
< name >
= A name to identify the port.
ras> switch port name up1 xyz
< priority >
=
The default ingress priority (0~7).
ras> switch port priority up1 3