ZyXEL Communications MSC1000G Series, User Manual

Page: 770 / 1168

Chapter 29 port Commands
Management Switch Card User’s Guide
770
limitmask set < slot-port >
< limitmask
Configures the PSD (Power Spectrum Density)
mask.
limitmask
:
1
: VDSL2_A_NUS0
2
~
11
:
VDSL2_A_EU[32,36,40,44,48,52,56,60,64,128]
12
: VDSL1_FTTEX_ANSI_M1
13
: VDSL1_FTTEX_ANSI_M2
14
: VDSL1_FTTCAB_ANSI_M1
15
: VDSL1_FTTCAB_ANSI_M2
16
: VDSL1_FTTEX_ANSI_M1_e
17
: VDSL1_FTTEX_ANSI_M2_e
18
: VDSL1_FTTCAB_ANSI_M1_e
19
: VDSL1_FTTCAB_ANSI_M2_e
20
: VDSL2_A_CT
21
~
36
: VDSL2_B8_[1..16]
37
~
46
: VDSL2_B7_[1..10]
47
: VDSL2_BT_ANFP
48
: VDSL2_C_138_b
49
: VDSL2_C_276_b
50
: VDSL2_C_138_co
51
: VDSL2_C_276_co
Four additional customer-defined PSD shapes can
be configured per system.
8
optionmask < slot-port > < option-
mask >
Sets the advanced DSL physical layer settings for
optional band on a VDSL port 8
power < slot-port >
fix|power|rate
< max_us_tx >
< max_ds_tx >
< max_rx >
Specifies the maximum allowed transmission
power and maximum aggregate received power.
fix|power|rate
: PSD and power adaptivity:
fix
: fixed mode
power
:
priority to power
rate
: priority to rate
max_us_tx
: maximum upstream transmission
power (-130~200 in 0.1 dBm).
max_ds_tx
: maximum downstream transmit
power (-50~200 in 0.1 dBm).
max_rx
: maximum aggregate receive power at
vtu-c (-255~255 in 0.1 dBm).
8
priority < slot-port >
< priority >
Sets the VDSL port(s) VLAN priority (0~7). 0 is the
lowest priority level and 7 is the highest. 8
Table 364
port Commands (continued)
COMMAND DESCRIPTION P