YOKOGAWA CW240 User Manual Download Page 54

Page: 54 / 388

3-22

IM CW240E

3.6

Turning ON the Power Switch

[

Model Name Screen

When the power switch is turned ON, the CW240 displays the following startup screen for
approx. 2 seconds.

Message Screen

This screen displays the model, version number, the presence of options, and self-check
results.

CW240 Ver 1.00
FPGA Check OK
SDRAM Check OK
SRAM Check OK
Flash Disk Check OK
RTC Check OK
EEPROM Check OK
Setting Check OK
Option:Analog In/Out

When the self-check has been completed normally, the screen displayed when
you previously turned OFF the CW240 appears.

To switch to the Top Menu screen shown
on the left, press the TOP MENU key.

TOP

MENU

key

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 54 / 388

Search results

Summary of Contents for CW240

Reviews: