YOKOGAWA CW240 User Manual Download Page 228

Page: 228 / 388

7-32

IM CW240E

7.6.3

Displaying a Vector

●

Displaying the Vector Screen

TOP

MENU

ENTER

LIGHT

TOP

MENU

SAVE

RANGE

START

&STOP

ESC

ENTER

DISP COPY

RANGE

[

Displaying the Measure screen

Press the F1 key (DISPLAY CHANGE).

The window for switching the screen appears.

[

Selecting a vector

Using the cursor key, select HARMONIC (highlighted).

Press the right direction cursor key to move to the Harmonic window.

Using the up and down direction cursor key, select VECTOR (highlighted).

[

Confirmation

ENTER

Press the ENTER key to confirm it.

The VECTOR screen appears.

Description of the Function Keys:

DISPLAY CHANGE

Switches the Measure screen.

LOAD CHANGE

Switches the load to be displayed. (For multiple loads)

—

HOLD

Holds or cancels a displayed screen.

HOLD/Clear

If there is integrated data, press the F5 key for more than 3

seconds to clear it as necessary.

7.6 Measuring Harmonics

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 228 / 388

Search results

Summary of Contents for CW240

Reviews: